Full Stave Rustic Oak Worktop 40mm By 750mm
Full Stave Rustic Oak Worktop 40mm By 750mm
The Full Stave Rustic Oak Worktop boons a charming warmth to any home. The rustic grade oak used denotes durability and authentic charm. It boasts a thickness of 40mm and a width of 750mm. The worktop comes in various lengths, allowing you to tailor your order based on your unique requirements. As a full stave worktop, it shows off the timber's personality and strength through long, continuous planks that run the full length of the worktop.
This tailored oak worktop reinforces its rustic allure, while also showcasing key aspects:
- Built from high-quality rustic grade oak, showcasing its natural appeal and durability.
- Displays continuous planks of oak running entire length and width of 750mm for a clean, unbroken appearance.
- Offered in various lengths to accommodate differentiation in layout or design.
- The 40mm thickness assures both strength and sturdiness.
- Designed for multi-functionality, suitable for kitchens, home office desks, shelves, and table tops.
If you are on the lookout for enhancing your space with a touch of rustic charm and quality, the Full Stave Rustic Oak Worktop makes the perfect choice. Its warmth and durability bring a homey yet elegant feel to kitchens, while also serving excellent as a desk in your home office. It's flexibility extends to shelves and table tops as well, amplifying any room decor with its natural allure. Choose this worktop for a versatile, dependable, and stylish addition to your home.
We strongly recommend to schedule the delivery max 2-3 days before the fitting.
Please ensure that your Worktops are completely re-wrapped after inspection and stored on completely flat and level surface, with bearers in between (this will allow the air to circulate between the worktops and prevent deflection). Do not store worktops vertically or on edges.
All worktops need to be kept inside your house (not in a garage or any other outbuilding). During storage, please make sure that they are kept well away from extreme heat (radiators, underfloor heating AGA’s and intense direct sunlight etc) and kept away from any moist areas (recently plastered walls, dump basements etc). All wet trades should be finished and a sufficient period of time allowed for natural drying out before storing hardwood worktops in the same room. Allow the worktop a day or so to adjust to the ambient temperature and humidity of its new surroundings prior to installation.
If you wish to store your worktops for a long period, you should turn them every other day to prevent cupping or bowing.
Wood is a natural product and may have significant colour variation, and whilst every effort is made to colour match as much as possible, we cannot guarantee any consistency of colour from one worktop to another.
The worktop’s appearance will be according to the grading mentioned, the grading refers to the top side only the bottom side can be lower grading with wood filler.
The full stave worktop is solid wood which can be affected from the humidity in the room and some time during the year the wood can have some small cracks which will disappear when the humidity is higher.
Please download and read carefully the following instruction guide
Wood and Beyond’s solid wood worktop surfaces are constructed from 40mm up to 120mm wide staves.
Carefully crafted from the highest quality raw materials to provide maximum strength, stability and durability throughout the years of service the worktop will provide.
The full stave worktop is made from staves of solid wood which are then cut, graded and kiln dried to ensure a moisture level suitable for domestic interior.
These materials are then glued together to form one homogeneous panel of wood which is stable and durable.
Full stave worktop is especially designed for interior use and will easily handle the day to day use required from a kitchen or bar worktop.
Free sample are available to order. The sample will allow you to feel the high quality of our wood and see its beautiful rich markings.
We aim to dispatch the sample within a day so you won't have to wait long.
Simply choose the 'Free Sample' option and complete the secure checkout process.
We strongly recommend to order a sample and not rely only on the photos on the web.
Due to the nature of the products, description and images should only be used for guidance.
The full stave worktop is a semi finished product, before fitting the worktop the carpenter must hand sanding to make the surface smooth without small scratches and ready for the oiling process, cut to size and oil all sides ( 6 sides)Â 3 layers should be applied.
The full stave worktop appearance will be according to the grading mentioned, the grading refer to the top side only the bottom side can be lower grading with wood filler .
The full stave worktop is solid wood which can be affected from the humidity in the room and some time during the year the wood can have some small cracks which will disappear when the humidity is higher.
From time to time we recommend to re oiled the top side.Â